| Symptom | Likely Fix in GravoStyle 7 | |--------|----------------------------| | | Check Object > Transformation > Mirror (should be unchecked). Also verify Engraving > Direction is not set to "Reverse". | | Engraving is too shallow | Increase Z‑axis pressure or Laser power in the material settings. | | Machine not responding | Go to Tools > Connection > Test . If fails, reinstall the USB driver from C:\GravoStyle7\Drivers . | | Job stops with "Limit switch error" | Your origin is too close to the edge. Reset origin (Home) and move job +5mm inside margins. |
✅ Step-by-step setup instructions ✅ Font and variable data management ✅ Maintenance schedules for your M40, IS400, or other Gravograph machines ✅ Troubleshooting common error codes gravostyle 7 user manual hot
Marco needed to engrave a batch of 200 brass plaques for a historic building renovation. The client was the mayor’s office. Deadline: tomorrow at 9 AM. The problem? The machine kept cutting too deep on the left side, then skipping letters entirely. The error code on the LCD screen was something he’d never seen: ERR 47: THERMAL DRIFT . | Symptom | Likely Fix in GravoStyle 7