Rok Power Washer Instructions

To keep your Rok power washer in good working order, it's essential to maintain it regularly. Here are some maintenance and storage tips:

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | No power supply / Faulty plug. | Check the fuse and plug. Ensure the outlet is working. | | No pressure / Pulsating pressure | Air in pump or clogged nozzle. | Turn off machine, squeeze trigger to bleed air. Check nozzle for blockages. Check water supply is fully turned on. | | Motor hums but does not run | Capacitor failure or seized pump. | Contact customer service. Do not continue running. | | Water leaking from unit | Loose connections or damaged seals. | Check O-rings (rubber washers) inside hose connections. Replace if worn. | rok power washer instructions

The most dangerous moment is often when the job is done. Simply switching off the machine is not enough. You must follow the : Turn the power switch to OFF . Turn off the water supply at the tap. To keep your Rok power washer in good

Screw the lance or wand onto the trigger gun. Ensure the outlet is working

For stubborn grease, ROK washers often include a detergent tank or siphon. Ensure you use only ; thick household soaps like dish liquid can clog the internal valves. If your nozzle is adjustable, you may need to shift it to a low-pressure setting to pull the soap from the tank before switching back to high pressure for the final rinse. Phase 4: The Safe Exit