Ensure the feedback arm and the rudder arm are parallel when the rudder is in the dead-ahead position. The transmission link should be at a 90-degree angle to both arms. Connection:

: Do not attempt to remove the transmitter arm from the feedback unit; it is factory-adjusted and only requires external setup as described in the Instruction Manual . Mounting Orientation : The

Simrad Rf300 Installation Manual

Ensure the feedback arm and the rudder arm are parallel when the rudder is in the dead-ahead position. The transmission link should be at a 90-degree angle to both arms. Connection:

: Do not attempt to remove the transmitter arm from the feedback unit; it is factory-adjusted and only requires external setup as described in the Instruction Manual . Mounting Orientation : The simrad rf300 installation manual