Palfingercranemanualerrorcodes — [updated]

): Simultaneously press and hold the and OLP buttons on the main console. The display will flash two sets of numbers; note the decimal point position (e.g., "21.12").

These codes typically appear on the main console display. A dot following the number (e.g., palfingercranemanualerrorcodes

| Error Code | Description | Immediate Action | | :--- | :--- | :--- | | | LMI (Load Moment Indicator) data invalid | Restart system. If reoccurs, check the LMI cable for cuts. | | 413 | Boom extension sensor error | Pull the boom out 1 meter and retract fully to "teach" the sensor. | | 425 | A2B (Anti-Two-Block) active or wire break | The hook is at the tip OR the rope has snapped the switch wire. | | 444 | Angle sensor out of range (below -5° or above 85°) | Replace the absolute encoder at the boom pivot pin. | ): Simultaneously press and hold the and OLP

Navigating is essential for maintaining operational safety and minimizing downtime. Palfinger electronic control systems, such as the Paltronic 50 and Paltronic 150 , use standardized numeric codes to indicate specific system statuses or hardware malfunctions. Understanding Palfinger Error Code Types A dot following the number (e