| LED Code | Error | Solution | |---------------|-------------------------------|----------------------------------------------| | 1 blink | Sensor signal too low | Clean sensor lenses, check cable continuity. | | 2 blinks | Actuator overload | Reduce mechanical load, check motor current. | | 3 blinks | Setpoint out of range | Reprogram reference voltage (0-10V input). | | Continuous red | Internal fault | Replace unit. |
: While IR sensors are robust, avoid pointing high-intensity spotlights directly into the sensor receiver. Finding the Full Manual PDF erhardt leimer do 8201 manual pdf
Runs on a Linux Kernel (2.6.26.8 RT 16) to ensure real-time stability for industrial environments. | LED Code | Error | Solution |