Dvb01 User - Manual

Relay closes below lower limit, opens above upper limit.

A recurring issue with DVB01 manuals is poor English translation. Examples from actual user reports:

Relay closes only when the measured voltage is between the upper and lower limits. F-05 (Out-Interval Pull-in): dvb01 user manual

Short press [SET] to enter a specific parameter. The flashing digit indicates which value is being modified. Use [SW1] to move between digits.

Once you share the manual text or a link, I can produce a write-up that includes: Relay closes below lower limit, opens above upper limit

Relay closes when the voltage is above the upper limit and opens when it falls below the lower limit. F-04 (In-Interval Pull-in):

: Offers separate activation and deactivation delays for the on-board relay, adjustable from 0 to 99.9 seconds Energy Efficiency F-05 (Out-Interval Pull-in): Short press [SET] to enter

: Includes 5 preset modes: monitoring, charging, discharging, in-range ON, and in-range OFF. Precision Measurement : Measures DC voltage from 0V to 100V with an accuracy of Adjustable Time Delays