Selmar-turbo-4-battery-charger-instructions !!hot!! -

charging lead to the positive battery terminal first, then connect the lead to the negative terminal.

: Includes a safety cutout that activates if the unit becomes excessively hot. selmar-turbo-4-battery-charger-instructions

: Avoid touching the clips together while the charger is plugged in. Maintenance : Check the internal fuses if the unit fails to power on. Tayna Batteries charging lead to the positive battery terminal first,

: Once the needle stays constant at its lowest point, unplug from the wall , then remove the clamps (negative then positive). Free-Instruction-Manuals.com Complete Review & Specifications Charge Voltage Charge Rate 4 Amps (Effective) / ~2.7 Amps (Continuous) Battery Compatibility 12V Lead-Acid (Standard, Sealed, and Gel) Safety Features Maintenance : Check the internal fuses if the

Ensure battery terminals are clean of corrosion before attaching clamps to ensure a good electrical connection. Never cross the cables. While the

: The needle will move toward the higher end (near 4 amps) if the battery is low.

As the battery reaches full capacity, the needle will slowly drop toward zero. Disconnecting