Our quality products and best service will make your business much better.
Professional . Specialized . Experienced
: In your cutting software (like Easy Cut Studio or SignBlazer), set the Model to "JK" and the Connection Type to "USB" .
A: Yes. The 10mm keyless chuck accepts any standard hex or round shank attachment, including right-angle drills and flexible extensions.
Run the setup.exe or installer file before plugging in the cutter. Once installed, connect the to your computer using the USB cable and power it on. 2. Software Configuration
file (usually named "GoldCut JK Series.exe"), and follow the prompts. If Windows warns you about "logo testing" or "unsigned drivers," select "Continue Anyway" Identify the Port : Once installed, check your Device Manager . Your cutter should appear under "Ports (COM & LPT)" as USB-SERIAL CH340 . Note the COM port number (e.g., COM3). 2. Software Compatibility
: Double-check that the "Connection Type" in your software is set to USB and not Serial/COM if you are using the direct USB cable.
during installation to allow the older driver files to load correctly. Key Hardware Specifications Specification Max Paper Feed Width Max Cutting Width Cutting Speed 10–800 mm/s Cutting Force Language Support DMPL / HPGL Software Compatibility
